Still ECH 12C Original Instructions Manual Download Page 100

Page: 100 / 114

–

When necessary, you must top up from the

filler port (1) with the specified hydraulic oil.

–

After topping up, lift the forks. The oil level

is fully topped up when you no longer hear

popping noises; continue to add oil if you

still hear popping noises.

–

Refit by following the above steps in re-

verse order.

Topping up the gear oil

–

Park the truck as specified.

–

Pull the key switch out to prevent the truck

from being accidentally started.

CAUTION

If you need to work underneath a raised truck, take

effective measures to prevent accidents such as the

truck overturning or slipping.

–

Remove the cover.

–

Pour correct gear oil into the grease fitting

(1).

CAUTION

Do not add gear oil that contains impurities.

–

Refit by following the above steps in re-

verse order.



Maintenance

Essential maintenance

5001 801 1532 EN - 10/2021 - 03

Summary of Contents for ECH 12C



















































































































Search results

Summary of Contents for ECH 12C

Reviews:

Related manuals for ECH 12C

Brands by name

Popular brands

Still ECH 12C, Original Instructions Manual

Search results

Summary of Contents for ECH 12C

Reviews:

Related manuals for ECH 12C

Brands by name

Popular brands