Still Easy Control Original Instructions Manual Download Page 55

Page: 55 / 66

Pre-Shift Check

–

Press the

Pre-Shift Check

Softkey.

The "Pre-Shift Check" menu appears and dis-

plays the available menus.
The following menus can be accessed:

●

History

●

Reset truck restrictions

●

Shift start

●

Question sequence

–

Press the respective Softkey to open the

menus.

Access authorisation

Description

The "Access authorisation" menu enables fur-

ther settings options to be released.

NOTE

This menu is important for personnel with the

corresponding access authorisation, such as

the fleet manager.

Operation

–

Press the button .

The first menu level appears.

–

Push the "Settings" Softkey.

The "Settings" menu appears.

–

Push the

Access authorisation

Softkey.

Fuhrparkleiter

Reset truck restrictions

Shift start

Question sequence

History



Access authorisation



Settings menu

Access authorisation

56378012101 EN - 10/2019

Summary of Contents for Easy Control



































































Search results

Summary of Contents for Easy Control

Reviews:

Related manuals for Easy Control

Brands by name

Popular brands

Still Easy Control, Original Instructions Manual

Search results

Summary of Contents for Easy Control

Reviews:

Related manuals for Easy Control

Brands by name

Popular brands