Maintenance
6
General maintenance information
Staff training and qualifications for
maintenance and repairs
Only qualified and authorized staff may
carry out the maintenance. The annual
inspection must be performed by an expert.
The expert must provide his opinion and
safety assessment irrespective of the internal
and financial circumstances of the company.
Only the safety aspect is decisive. He must
have adequate knowledge and experience
to assess the state of the vehicle and the
effectiveness of the protective devices in
accordance with the rules of technology and
the basic principles of fork trucks.
Battery maintenance personnel
Batteries can only be recharged, maintained
and changed by specially trained personnel
who follow the manufacturer’s instructions for
the battery, the battery charger and the truck.
Follow the battery maintenance instructions
and the battery charger operating instructions.
Services not requiring special
qualifications
Simple maintenance operations such as
checking the hydraulic fluid level or checking
the battery electrolyte level can be carried
out by persons with no special training. A
qualification such as that outlined above is not
necessary. Refer to the maintenance section
of this manual for further information.
50108043405 [EN]
107
Summary of Contents for CX
