SR 5600
English
15
As soon as the engine runs
N
Move setting lever (2) to lower stop
– the engine settles down to idle
speed.
Stopping the Engine
N
Move the stop switch (1) to
$
Other Hints on Starting
At very low outside temperatures
N
Warm up the engine.
As soon as the engine runs:
N
Move setting lever to lower stop –
the engine settles down to idle
speed.
N
Open throttle slightly – warm up the
engine for a short period.
If engine does not start
If you did not turn the choke knob to
e
quickly enough after the engine began to
fire, the combustion chamber is flooded.
N
Remove the spark plug – see
"Spark Plug".
N
Open the throttle wide.
N
Crank the engine several times with
the starter to clear the combustion
chamber.
N
Install the spark plug – see "Spark
Plug".
N
Slide the stop switch to
#
and set
the choke knob to
e
– even if the
engine is cold.
N
Now start the engine.
If fuel tank has been run completely dry
and then refueled
N
Pull the starter rope several times to
prime the fuel system.
Determining surface area (m
2
)
In the case of ground crops, simply
multiply the length of the field by its
width.
The surface area of high-growing plants
is calculated approximately by
measuring the length of the rows and the
average height of the foliage. The result
is multiplied by the number of rows and
then by two if both sides have to be
treated.
The surface area in hectares is obtained
by dividing the number of square meters
by 10,000.
Example:
A field 120 meters long and 30 meters
wide has to be treated with a pesticide.
Area:
120 m x 30 m = 3,600 m
2
3,600 / 10,000 = 0.36 ha
Determining quantity of active ingredient
Refer to the instructions supplied with
the active ingredient to determine:
–
Required quantity of active
ingredient for 1 hectare (ha).
–
Concentration of active ingredient
(mix ratio).
373BA014 KN
2
1
373BA015 KN
Calculating Required
Quantity of Solution
