![background image](http://html1.mh-extra.com/html/stihl/rma-370/rma-370_instruction-manual_1379466016.webp)
RMA 370
English
14
The LED (1) on the charger may glow
continuously green or flash red.
Green continuous light ...
... indicates the following:
The battery
–
is being charged
–
is too hot and must cool down
before charging
See also "LEDs on battery".
The green LED on the charger goes off
as soon as the battery is fully charged.
Red flashing light ...
... may indicate the following:
–
No electrical contact between
battery and charger – remove and
refit the battery
–
Malfunction in battery – see also
"LEDs on Battery".
–
Malfunction in charger – have
checked by a servicing dealer.
STIHL recommends an authorized
STIHL servicing dealer.
When delivered, the battery is not fully
charged.
It is advisable to charge the battery
completely before using it for the first
time.
Insert the battery
Open the battery compartment
N
Press the retaining lug (1) slightly in
and fold out the cover (2) to the
back
Insert the locking key
The engine can only be started if the
locking key is inserted.
N
Push the locking key (3) as far as it
will go into the base (4)
3)
Electromagnetic interference or
fault. Take the battery out of the
power tool and refit it. Switch on the
machine – if the LEDs continue to
flash, the battery has a malfunction
and must be replaced.
4)
Electromagnetic interference or
fault. Take the battery out of the
machine. Use a blunt tool to
remove dirt from the contacts in the
battery compartment. Refit the
battery. Switch on the power tool –
if the LEDs still flash, the power tool
has a malfunction and must be
checked by a servicing dealer –
STIHL recommends an authorized
STIHL servicing dealer.
Light Emitting Diodes (LED)
on Charger
1
3901BA019 KN
Switching On
9929BA014 KN
2
1
4
3
9929BA015 KN