![background image](http://html1.mh-extra.com/html/stihl/rma-370/rma-370_instruction-manual_1379466013.webp)
RMA 370
English
11
Setting the cutting height
N
Push the height adjustment
lever (1) slightly away from the
cordless lawn mower until the snap
fittings (2) release the lever.
Greater cutting height:
N
Lift the cordless lawn mower with
the height adjustment lever (1) – the
lever is pushed forwards
Smaller cutting height:
N
Push the cordless lawn mower
down with the height adjustment
lever (1) – the lever is pushed
backwards
N
Push the height adjustment
lever (1) towards the cordless lawn
mower until the snap fittings (2)
engage in the lever.
The selected cutting height is shown on
the front snap fitting (3).
Power supply (mains) voltage and
operating voltage must be the same.
N
Insert the plug (1) in the wall
outlet (2).
A self test is performed after the charger
is connected to the power supply. During
this process, the light emitting diode (1)
on the charger lights up green for about
1 second, then red and goes off again.
A factory-new battery is not fully
charged.
Recommendation: Fully charge the
battery before using it for the first time.
N
Connect the charger to the power
supply – mains voltage and
operating voltage of the charger
must be the same – see
"Connecting Charger to Power
Supply".
Operate the charger only in enclosed
and dry rooms at ambient temperatures
b5°C to +40°C (+41°F to
+104°F)
Only charge dry batteries. Allow a damp
battery to dry before charging.
N
Push the battery (1) into the
charger (2) until noticeable
resistance is felt – then push it as far
as stop.
1
3
2
9929BA049 KN
Connecting Charger to
Power Supply
3901BA015 KN
2
1
1
3901BA019 KN
Charging the Battery
2
3901BA009 KN