Stihl RE 150 Instruction Manual Download Page 7

sure washer to move and topple over. Dam‐

age to property may occur.

► Do not pull on the high-pressure hose,

water hose or connecting cable.

■ If the high-pressure washer is placed on a

sloping, uneven or soft surface it may move

and topple over. Damage to property may

occur.

► Place the high-pressure washer on a hori‐

zontal, flat, hard surface.

■ If working at a height, the high-pressure

washer or the spray attachment may fall to the

ground. This may result in serious injury to

people and damage to property.

► Use a lift bucket or secure scaffolding.

► Do not place the high-pressure washer in a

lift bucket or on scaffolding.

► If the high-pressure hose does not have

sufficient reach: Extend the high-pressure

hose by connecting a high-pressure hose

extension.

► Secure the spray attachment so that it can‐

not fall.

■ The water jet may detach asbestos fibers from

surfaces. Asbestos fibers may spread through

the air after drying and be breathed in. Breath‐

ing in asbestos fibers can be harmful to health.

► Do not clean surfaces containing asbestos.

■ The water jet may remove oil from vehicles or

machinery. The oily water may enter the soil,

the water system or the drains. That would

create an environmental hazard.

► Vehicles or machinery should only be

cleaned at places where there is an oil trap

in the water drain.

■ In combination with leaded paint the water jet

can form leaded aerosols and leaded water.

Leaded aerosols and leaded water may enter

the soil, the water system or the drains. Inhal‐

ing aerosols can be harmful to health and trig‐

ger allergic reactions. That would create an

environmental hazard.

► Do not clean surfaces that are painted or

lacquered with leaded paint.

■ The water jet can damage sensitive surfaces.

Damage to property may occur.

► Do not clean sensitive surfaces with the

rotary nozzle.

► Sensitive surfaces made of rubber, fabric,

wood and similar materials should be

cleaned at a lower operating pressure and

from a greater distance.

■ If while in use the rotary nozzle is immersed in

dirty water and then operated, the rotary noz‐

zle may be damaged.

► Do not use the rotary nozzle with dirty

water.

► If cleaning a container: Empty the container

and allow the water to flow away while

cleaning it.

■ Easily combustible and explosive liquids that

are sucked in can cause fires and explosions.

Persons may be seriously or fatally injured

and property may be damaged.

► Do not suck in or spread easily combustible

or explosive liquids.

■ Drawing in irritant, corrosive and toxic liquids

can endanger health and damage components

of the high-pressure washer. Persons may be

seriously or fatally injured and property may

be damaged.

► Do not suck in or spread irritating, caustic

or toxic liquids.

■ The strong water jet can seriously injure peo‐

ple and animals and cause damage to prop‐

erty.

► Do not direct the water jet at

people and animals.

► Do not direct the water jet at places that are

not fully visible.

► Do not use the water jet to clean clothing

while wearing it.

► Do not use the water jet to clean shoes or

boots while wearing them.

■ If electrical equipment, electrical connections,

sockets and live power cords come into con‐

tact with water, electric shock may result. Per‐

sons may be seriously or fatally injured and

property may be damaged.

► Do not direct the water jet at

electrical systems, electrical

connections, sockets and live

cables.

► Do not direct the water jet at the connecting

cable or extension cable.

■ If electrical appliances or the high-pressure

washer come into contact with water, electric

shock may result. The user may be seriously

injured or killed and property may be dam‐

aged.

► Do not direct the water jet at

electrical appliances and the

high-pressure washer itself.

► Keep electrical appliances and the high-

pressure washer away from the surface to

be cleaned.

4 Safety Precautions

English

0458-603-0121-B

7

Summary of Contents for RE 150





























Reviews: