Stihl RE 150, Instruction Manual

Page: 23 / 28

–
Protection class: I
–
Degree of of electrical protection: IPX5
–
Working pressure (p): 12 MPa (120 bar)
–
Max. permissible pressure (p max.): 18 MPa
(180 bar)
–
Max. water supply pressure (p in max.): 1 MPa
(10 bar)
–
Max. water throughput (Q max): 8.7 l/min
(522 l/h)
–
Minimum water throughput (Q min.): 7.8 l/min
(468 l/h)
–
Maximum kickback force: 16 N
–
Max. suction lift: 0.5 m
–
Max. water temperature in pressure mode
(t in max): 60 °C
–
Max. water temperature in suction mode:
20 °C
sample inspection
–
Length: 383 mm
–
Width: 380 mm
–
Maximum height: 981 mm
–
Minimu height: 792 mm
–
Length of high-pressure hose: 9 m
–
Weight (m) with accessory attached: 30 kg
Version 220 V / 60 Hz
–
Fuse (characteristic "C" or "K"): 15 A
–
Power consumption: (EU) 2019/1781 §2(2) (j):
2.8 kW
–
Maximum permitted network impedance: 0.32
Ohm
–
Protection class: I
–
Degree of of electrical protection: IPX5
–
Working pressure (p): 13 MPa (130 bar)
–
Max. permissible pressure (p max.): 18 MPa
(180 bar)
–
Max. water supply pressure (p in max.): 1 MPa
(10 bar)
–
Max. water throughput (Q max): 10 l/min
(600 l/h)
–
Minimum water throughput (Q min.): 9.3 l/min
(560 l/h)
–
Maximum kickback force: 20 N
–
Max. suction lift: 0.5 m
–
Max. water temperature in pressure mode
(t in max): 60 °C
–
Max. water temperature in suction mode:
20 °C
sample inspection
–
Length: 383 mm
–
Width: 380 mm
–
Maximum height: 981 mm
–
Minimu height: 792 mm
–
Length of high-pressure hose: 9 m
–
Weight (m) with accessory attached: 30 kg
Parameters dependent on pressure have been
measured at an inlet pressure of 0.3 MPa (3
bar).
19.2 Pressure washer STIHL RE
170
Version 230 V / 50 Hz
–
Fuse (characteristic "C" or "K"): 16 A
–
Power consumption: EU) 2019/1781 §2(2) (j):
3.3 kW
–
Maximum permitted network impedance: 0.32
Ohm
–
Protection class: I
–
Degree of of electrical protection: IPX5
–
Working pressure (p): 15 MPa (150 bar)
–
Max. permissible pressure (p max.): 18 MPa
(180 bar)
–
Max. water supply pressure (p in max.): 1 MPa
(10 bar)
–
Max. water throughput (Q max): 10.8 l/min
(648 l/h)
–
Minimum water throughput (Q min.): 9.5 l/min
(570 l/h)
–
Maximum kickback force: 24 N
–
Max. suction lift: 0.5 m
–
Max. water temperature in pressure mode
(t in max): 60 °C
–
Max. water temperature in suction mode:
20 °C
sample inspection
–
Length: 383 mm
–
Width: 380 mm
–
Maximum height: 981 mm
–
Minimu height: 792 mm
–
Length of high-pressure hose: 9 m
–
Weight (m) with accessory attached: 30 kg
Parameters dependent on pressure have been
measured at an inlet pressure of 0.3 MPa (3
bar).
19.3 Extension Cords
If an extension cord is used, it must have a
ground wire and the wire gage of its conductors
must meet the following minimum requirements –
depending on the line voltage and length of the
extension cord:
If rated voltage on the rating label is 220V to
240V:
–
Cord length up to 20 m: AWG 15 / 1.5 mm²
–
Cord length 20 m up to 50 m: AWG 13 /
2.5 mm²
19 Specifications English
0458-603-0121-B 23