MS 460 R
English
7
N
Mount chain catcher (5) with
screw (3)
N
Tighten down the screws and nuts
crosswise
Chain sprocket cover
N
For mounting the saw chain and
guide bar, use the chain sprocket
cover (1) in the conversion kit –
spacers (2), cover (3) and spiked
bumper (4) must be mounted
N
Mount the bar and chain – see
Instruction Manual for the basic
chain saw
N
Mount the depth limiter – see
"Mounting the depth limiter"
N
Switch off the engine
N
Put on protective gloves
N
Loosen adjusting screw (1)
N
Push the slide (2) toward the engine
as far as it will go
N
Undo the nuts (3)
N
Raise the guide bar at the nose
N
Use the screwdriver to turn the
screw (4) to the right until the saw
chain rests against the underside of
the guide bar
N
Raise the guide bar further and
tighten the nuts securely
N
Continue with "Check chain
tension"
A new saw chain must be retensioned
more frequently than one that has been
in use already for an extended period.
N
Check chain tension frequently –
see "Operating Instructions" in the
Instruction Manual of the basic
chain saw
Tensioning the saw chain
(depth limiter installed)
Summary of Contents for MS 460 R
