MS 460 R
English
8
N
Switch off the engine
N
Put on protective gloves
N
Loosen adjusting screw (1)
N
Push the slide (2) toward the engine
as far as it will go
N
The saw chain must lie against the
bottom of the bar – and it must be
possible to pull it across the guide
bar by hand when the chain brake is
released
N
if necessary, retension saw chain
A new saw chain must be retensioned
more frequently than one that has been
in use already for an extended period.
N
Check chain tension frequently –
see "Operating Instructions" in the
Instruction Manual of the basic
chain saw
N
Adjust the depth of cut
Never use a dull or damaged saw chain
– this leads to increased physical strain,
increased vibration load, unsatisfactory
cutting results and increased wear.
N
Clean the saw chain
N
Check the saw chain for cracks and
damaged rivets
N
Replace damaged or worn chain
components and adapt these parts
to the remaining parts in terms of
shape and level of wear – rework
accordingly
Compliance with the angles and
dimensions listed below is absolutely
necessary. An improperly sharpened
saw chain – especially depth gauges
that are too low – can lead to increased
kickback tendency of the chain saw –
risk of injury!
Saw chain 36 RDR
A Sharpening angle 15°
B Side plate angle 85°
Checking the chain tension
(depth limiter installed)
Maintaining and Sharpening
the Saw Chain
Summary of Contents for MS 460 R
