MS 311, MS 391
English
31
Remove shroud
N
Move the Master Control lever to the
stop position
0
N
Push the hand guard forwards – the
saw chain is blocked
N
Loosen screws (1)
N
Remove the shroud (2)
Removing the fan housing
N
Remove screws (1)
N
Push hand guard upward
N
Pull the bottom of the fan housing
away from the crankcase and
remove downwards
Replace torn starter rope
N
Carefully press the spring clip (2) off
of the axle with a screw driver or
suitable pliers
N
Carefully remove the rope rotor with
washer (3) and pawls (4)
N
Lever the rope out of the starter
handle with a screwdriver
N
Remove the remainder of the rope
from the rotor and starter handle
N
Thread the new starter rope through
the starter handle and secure it by
making a special knot
N
Pull the knot into the starter handle
N
Thread the rope from above through
the rope guide bush (5) and rope
rotor (6) and secure with a simple
knot
N
Coat the bearing bore in the rope
rotor with non-resinous oil
N
Slip the rope rotor onto the starter
post (7) – turn it back and forth a
little until the anchor loop of the
rewind spring engages
Replacing the Starter Rope
and Rewind Spring
1
4903BA002 KN
1
1
2
1
1
1
1
4903BA005 KN
The rewind spring can jump out –
risk of injury!
4
4
3
2
001BA096 KN
213BA018 KN
6
7
213BA020 KN
5
Summary of Contents for MS 391
