27
MS 381
English
At very low outside temperatures:
:
Allow engine to warm up at part
throttle.
To shut down the engine:
:
Move Master Control lever to
c
If fuel tank has been run until dry
and then refueled:
:
Press the button to open the
decompression valve.
:
Pull starter rope several times until
fuel system is primed.
:
Now start the engine.
If the engine does not start:
If you did not move the Master Control
lever to the "warm start" position quickly
enough after the engine began to fire,
the combustion chamber has flooded.
:
Move Master Control (
7
) to run
position.
:
Loosen knob (
10
) in direction of
arrow.
:
Remove carburetor box cover (
11
).
:
Pull off the spark plug boot.
:
Unscrew and dry off the spark plug.
:
Set the Master Control lever to
c
:
Press down the trigger interlock
lever – open the throttle wide and
crank the engine several times with
the starter to clear the combustion
chamber.
:
Install the spark plug and connect
the spark plug boot (press it down
firmly
) – reassemble the other
parts.
:
Set the Master Control lever to the
warm start position – even if the
engine is cold.
:
Press the button to open the
decompression valve.
:
Now start the engine.
215BA004 KN
7
10
11
215BA005 KN