MS 362 C-M
español / EE.UU
95
Entre las rodillas o los muslos
N
Sujete el mango trasero bien
apretado entre las piernas un poco
más arriba de las rodillas.
N
Agarre firmemente el mango
delantero con la mano izquierda – el
pulgar debe quedar debajo del
mango.
Arranque
N
Con la mano derecha tire
lentamente del mango de arranque
hasta que sienta una resistencia
definitiva y en seguida dele un tirón
fuerte y rápido y, al mismo tiempo,
empuje hacia abajo el mango
delantero. No tire de la cuerda de
arranque totalmente hasta afuera,
se podría romper. No deje que el
mango de arranque salte
bruscamente hacia atrás. Guíelo
lentamente hacia el interior de la
caja para que la cuerda de arranque
se enrolle correctamente.
Máquinas sin bomba de combustible de
mano adicional: Si el motor es nuevo o
después de un período prolongado sin
uso o si el tanque de combustible está
vacío (el motor se ha parado), puede ser
necesario tirar de la cuerda de arranque
varias veces para cebar el sistema de
combustible.
Arranque de la motosierra
Válvula de descompresión
N
Presione el botón para abrir la
válvula de descompresión.
La válvula de descompresión se cierra
tan pronto el motor se enciende. Por
esta razón se debe oprimir el botón
antes de cada intento de arranque.
ADVERTENCIA
Las personas ajenas al trabajo deben
mantenerse alejadas de la zona general
de uso de la sierra.
0001BA037 KN
0001BA038 KN
5902BA006 KN