69
MS 231, MS 231 C, MS 251, MS 251 C
9.3.2
Buffers on Filter Base
– Remove the filter base,
b
12.3
:
Take out the screw (1).
:
Press the tank housing (2) down
a little and hold it there.
:
Push out the buffers (1) from the
underside (arrows).
– Check the buffers (1) and replace
if necessary
2310RA249 TG
1
2
2310RA250 TG
1
1
Installing
:
Position the buffers (1)
with their tapered ends facing the
bores (arrows).
– Use STIHL press fluid to simplify
assembly,
b
14
:
Push the tapered ends of the
buffers (1) fully into the
bores (arrows), turning them
back and forth to simplify
installation.
The tapered ends (arrows) must be
properly seated on the other sides
of the bores.
2310RA251 TG
1
1
2310RA252 TG
:
Push the tank housing (1)
upwards and hold it there.
:
Insert and tighten down the
screw (2) firmly.
– Reassemble all other parts in the
reverse sequence.
9.4
Handlebar
– Remove the shroud,
b
6.4
:
Take out the screw (1).
2310RA253 TG
2
1
2310RA242 TG
1
All manuals and user guides at all-guides.com
