![background image](http://html1.mh-extra.com/html/stihl/ms-231/ms-231_manual_1378765042.webp)
41
MS 231, MS 231 C, MS 251, MS 251 C
:
Apply a bead of sealant to the
engine pan so that it is about 2 –
3 mm high (a).
Make sure the sealant does not
project into the crankcase.
:
Apply sealant to the groove in the
sealing face,
b
14
Do not coat oil seals with sealant.
:
Position the engine pan (1) so
that the tab (2) lines up with the
shoulder (3) on the cylinder.
a
938RA098 TG
2310RA111 TG
2310RA112 TG
1
3
2
:
Place the engine pan (1) on the
cylinder's sealing face.
– Press the engine pan carefully
into position so that the sealant is
evenly distributed.
Take care not to damage the
crankshaft stubs.
– Install the engine,
b
6.5
6.7
Bearings / Crankshaft
– Remove the engine,
b
6.5
– Remove the crankshaft and pull
off the oil seals,
b
6.6
– Remove the piston,
b
6.8
:
Pull out the needle cage (1),
check it and replace if necessary.
2710RA113 TG
1
:
Pull the ball bearing (1) off the
tapered crankshaft stub (ignition
side).
:
Pull the ball bearing (1) off the
straight crankshaft stub (clutch
side).
The crankshaft, connecting rod and
needle bearing form an inseparable
unit.
When fitting a replacement
crankshaft, always install new ball
bearings and oil seals.
2710RA114 TG
1
2710RA115 TG
1
All manuals and user guides at all-guides.com