MS 201 C-M
English
18
A cutting attachment consists of the saw
chain, guide bar and chain sprocket.
The cutting attachment that comes
standard is designed to exactly match
the chain saw.
–
The pitch (t) of the saw chain (1),
chain sprocket and the nose
sprocket of the Rollomatic guide bar
must match.
–
The drive link gauge (2) of the saw
chain (1) must match the groove
width of the guide bar (3).
If non-matching components are used,
the cutting attachment may be damaged
beyond repair after a short period of
operation.
Chain Scabbard
Your saw comes standard with a chain
scabbard that matches the cutting
attachment.
If guide bars of different lengths are
mounted to the saw, always use a chain
scabbard of the correct length which
covers the complete guide bar.
The length of the matching guide bars is
marked on the side of the chain
scabbard.
Disengaging the Chain Brake
N
Pull the hand guard towards the
front handle until there is an audible
click – the chain brake is
disengaged.
Removing the Chain Sprocket Cover
N
Rotate the captive nut (1)
counterclockwise until it hangs
loosely in the sprocket cover.
N
Remove the sprocket cover (2) with
captive nut.
Cutting Attachment
001BA248 KN
1
2
3
a
001BA244 KN
Mounting the Bar and Chain
001
1BA041 KN
1
001
1BA002 KN
2
