![background image](http://html.mh-extra.com/html/stihl/ms-191/ms-191_service-manual_1378868024.webp)
23
MS 311, MS 391
:
Take the brake lever (2) out of the
hand guard (1).
– Inspect the pivot pins and replace
if necessary,
b
5.5
– Inspect the cam lever and
replace if necessary,
b
5.4
Installing
– Clean all disassembled parts,
b
14
:
Hold the brake lever (1) so that
the brake spring attachment point
(arrow) is at the top.
:
Push the brake lever (1) into the
hand guard recess and line up
the holes.
4903RA032 TG
1
2
4903RA033 TG
1
:
Push the hand guard with brake
lever (1) over the machine until
they are positioned against the
pivot pins (arrows).
:
Lift the bearing boss of the hand
guard and the brake lever a little
and position them over the pivot
pins (arrows).
:
Turn the cam lever (1) to one side
until the cam of the hand
guard (arrow) slips passed it.
– Push the hand guard bearing
boss and the brake lever on to
the pivot pins.
4903RA034 TG
1
4903RA035 TG
4903RA036 TG
1
:
Fit the spacer sleeve (1).
– Fit the strap (1).
:
Fit the E-clip (2).
4903RA272 TG
1
4903RA037 TG
1
2