![background image](http://html.mh-extra.com/html/stihl/ms-191/ms-191_service-manual_1378868023.webp)
22
MS 311, MS 391
:
Insert the screws (arrows) and
tighten them down firmly.
– Fit the bumper strip.
– Install the clutch drum,
b
4.1
– Check operation,
b
5.1
– Reassemble all other parts in the
reverse sequence.
4903RA026 TG
5.3
Brake Lever
– Troubleshooting,
b
3
– Remove the brake band,
b
5.2
– Engage the chain brake.
The brake spring is now relaxed.
:
Use the assembly tool
1117 890 0900 to disconnect the
brake spring (1) from the anchor
pin (arrow).
– Remove the brake spring from
the brake lever.
– Remove the shroud,
b
6.4
:
Take out the screws (arrows).
– Remove the sleeve (1).
– Lift the hand guard a little and
remove the fan housing.
4903RA027 TG
1
4903RA119 TG
:
Remove the E-clip (1).
:
Lift and turn the strap (1) slightly,
push it towards the hole (arrow)
and remove it.
:
Remove the spacer sleeve (2)
from the brake lever.
:
Pull the hand guard (1) and brake
lever (2) off the pivot pins
(arrows) together.
– Remove the hand guard and
brake lever.
4903RA029 TG
1
2
4903RA030 TG
1
4903RA031 TG
1
2