![background image](http://html1.mh-extra.com/html/stihl/ms-151-c/ms-151-c_instruction-manual_1378856024.webp)
Position choke shutter closed
l
201
1BA019 KN
–
if engine is cold (even if the engine has stalled
during opening of throttle after starting)
Choke shutter open
j
201
1BA020 KN
–
if engine is warm (once the engine has been
running for approx. one minute)
► Hold and start your saw as described
15.8
When Engine Begins to Fire
201
1BA020 KN
► Move the choke lever to the open posi‐
tion
j
.
► Hold and start your saw as described
15.9
As Soon As the Engine Runs
1
201
1BA022 KN
2
► Press down the trigger lockout and blip the
throttle trigger (2) – the Master Control
lever (1) moves to the run position
F
and the
engine settles down to idling speed.
201
1BA001 KN
► Pull the hand guard toward the handlebar to
disengage the chain brake.
NOTICE
Open the throttle only when the chain brake is
off. Increased engine speeds with the chain
brake on (saw chain is stationary) will quickly
damage the clutch and chain brake.
► After a cold start, warm up the engine at vary‐
ing speeds – your saw is ready for operation.
15.10 At Very Low Outside Tempera‐
tures
In case of erratic idling behaviour or poor accel‐
eration
► Readjust carburetor if necessary, see "Adjust‐
ing the Carburetor".
► If your saw is very cold (frost or ice on
machine), start the engine and keep it at a
high idle speed (with chain brake disengaged)
until it reaches normal operating temperature.
English
15 Starting / Stopping the Engine
24
0458-506-0121-C