![background image](http://html1.mh-extra.com/html/stihl/kombitool-ht-km-4182/kombitool-ht-km-4182_instruction-manual_1379554020.webp)
HT-KM
English
18
The drive link tangs will otherwise
scrape along the bottom of the groove –
the cutters and tie straps will not ride on
the bar rails.
For periods of 3 months or longer
N
Remove the saw chain and guide
bar, clean them and spray with
corrosion inhibiting oil.
N
If you use a biological chain and bar
lubricant, e.g. STIHL BioPlus,
completely fill the chain oil tank.
N
If the KombiTool is removed from
the KombiEngine and stored
separately: Fit the protective cap on
the drive tube to avoid dirt getting
into the coupling.
N
Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
N
Remove chain sprocket cover, saw
chain and guide bar
Replace the chain sprocket
–
replace after using two saw chains
or sooner
–
if the wear marks (a) on the sprocket
are deeper than approx. 0.5 mm
(0.02 in) since this would reduce the
service life of the saw chain. You
can use a gauge (special
accessory) to check the depth of the
wear marks
Using two saw chains in alternation
helps preserve the chain sprocket.
STIHL recommends the use of original
STIHL chain sprockets.
Storing the Machine
Checking and Replacing the
Chain Sprocket
a
000BA054 KN
Summary of Contents for KombiTool HT-KM 4182
Page 1: ...STIHL HT KM Instruction Manual...
Page 2: ......
Page 31: ......
Page 32: ...www stihl com 04584730121C 0458 473 0121 C 0458 473 0121 C englisch G...