![background image](http://html1.mh-extra.com/html/stihl/kombitool-ht-km-4182/kombitool-ht-km-4182_instruction-manual_1379554011.webp)
HT-KM
English
9
N
Pull the protective caps off the ends
of the shaft and keep them in a safe
place for later use – see "Storing the
Machine"
NOTICE
The plug may come out of the drive tube
when you pull off the cap. Push it back
into the shaft as far as it will go.
Mounting the gearbox
N
Apply a mark to the shaft at distance
(A) of 50 mm (2 in.)
N
Push the gearbox (1) onto the
shaft (2) as far as stop – turn the
gearbox back and forth until the
square end of the shaft engages
The gearbox is correctly positioned
when the end of its housing reaches or
covers the mark (arrow).
N
Insert the clamp screws (3) as far as
it will go
N
Line up the gearbox (1) so that the
chain sprocket cover is exactly
vertical and the lug (arrow) on the
end of the drive tube faces up
N
Tighten down the clamp screws (3)
in the following sequence:
–
tighten the left screw moderately
–
tighten the right screw moderately
–
tighten down the left screw firmly
–
tighten down the right screw firmly
Assembling the Unit
413BA014 KN
002BA248 KN
A
402BA002 KN
0000097202_001
1
2
0000097203_001
1
3
3
1
0000097204_001
Summary of Contents for KombiTool HT-KM 4182
Page 1: ...STIHL HT KM Instruction Manual...
Page 2: ......
Page 31: ......
Page 32: ...www stihl com 04584730121C 0458 473 0121 C 0458 473 0121 C englisch G...