![background image](http://html1.mh-extra.com/html/stihl/hse-60/hse-60_instruction-manual_1379757017.webp)
16
English
HSE 60, HSE 70
Overload Circuit Breaker
The overload circuit breaker in the
powerhead cuts off the power supply to
the hedge trimmer in case of mechanical
overload, e.g. due to blocked cutting
blades while front-handle and rear
trigger switches remain activated.
If the overload circuit breaker has cut
off the power supply:
:
Release both the front-handle and
rear trigger switches.
:
Unplug the hedge trimmer from the
extension cord.
:
Clear the cutting blades from all
obstructions which caused the
blocking.
:
Wait for the circuit breaker to cool
down for approximately 1 minute.
Connect the hedge trimmer to the
extension cord again. If the motor does
not start when both the front-handle and
rear trigger switches are activated, the
overload circuit breaker has not cooled
down sufficiently.
Once the motor starts:
Run your hedge trimmer for about 15
seconds off-load. This helps to cool
down the motor and the overload circuit
breaker and helps to prevent an
undesired tripping of the circuit breaker
due to heat still retained from the earlier
overload.
For periods of about 3 months or longer:
:
Clean the cutting blades, check
condition and spray with STIHL
resin solvent.
:
Fit the blade scabbard
:
Thoroughly clean the machine
:
Store the machine in a dry and high
or locked location – out of the reach
of children and other unauthorized
persons.
Storing the Machine
All manuals and user guides at all-guides.com