![background image](http://html1.mh-extra.com/html/stihl/hsa-65/hsa-65_instruction-manual_1379740010.webp)
HSA 65
English
8
Working Techniques
Vertical cut
Swing the cutting blade from the bottom
upwards in an arc – lower the nose of the
blade, move along the hedge and then
swing the blade up again in an arc.
Any working position above head height
is tiring. To minimize the risk of
accidents, work in such positions for
short periods only.
Horizontal cut
Hold the cutting blade at an angle of 0°
to 10° as you swing the hedge trimmer
horizontally, using both sides of the
blade.
Swing the cutting blade in an arc
towards the outside of the hedge so that
the cuttings are swept to the ground.
Repeat the procedure several times on
wide hedges.
Mains voltage and operating voltage
must be the same.
N
Insert the mains plug (1) in the wall
outlet (2).
A self test is performed after the charger
is connected to the power supply. During
this process the light emitting diode (1)
on the charger lights up green for about
1 second, then red and goes off again.
3901BA004 KN
3901BA025 KN
3901BA006 KN
Connecting Charger to
Power Supply
3901BA015 KN
2
1
1
3901BA019 KN
All manuals and user guides at all-guides.com