![background image](http://html1.mh-extra.com/html/stihl/hl-45/hl-45_instruction-manual_1378702019.webp)
HL 45
English
17
N
Set choke to
g
and pull starter rope
five times. Set choke to
e
and
continue cranking.
If the engine is warm (choke set to
e
)
N
Continue cranking until the engine
runs.
As soon as the engine runs
N
Squeeze the throttle trigger to
disengage the tongue – the engine
will settle down to idle speed.
If the engine stops during warm-up or
acceleration
N
Repeat the starting procedure as
described under "If the engine is
cold".
WARNING
Make sure the carburetor is correctly
adjusted. The cutting blades must not
move when the engine is idling.
Your machine is now ready for
operation.
Stopping the Engine
N
Move the stop switch to O.
Other Hints on Starting
If the engine does not start
N
Make sure all settings are correct
(choke shutter, throttle trigger in
starting throttle position, stop switch
to I).
N
Repeat the starting procedure.
If the engine still does not start
N
Move the stop switch to O.
N
Remove the spark plug boot (7).
N
Unscrew and dry off the spark plug.
N
Open the throttle wide.
N
Crank the engine several times with
the starter to clear the combustion
chamber.
N
Refit the spark plug.
N
Connect the spark plug boot (press
it down firmly).
N
Move the stop switch to I.
N
Set choke lever to
e
– even if the
engine is cold.
N
Now start the engine.
If fuel tank has been run completely dry
and then refueled
N
Press the manual fuel pump
bulb (6) at least five times – even if
the bulb is filled with fuel.
N
Now start the engine.
7
405BA012 KN
6
405BA014 KN
Summary of Contents for HL 45
Page 2: ...Instruction Manual 1 34 Manual de instrucciones 35 72 ...
Page 75: ......