background image

41

DE

FR

NL

IT

ES

PT

NO

SV

FI

DA

PL

SL

SK

HU

EN

0478 216 9907 C - EN

11

.5 Changing the engine oil 

Maintenance interval:

The recommended oil change intervals, 
the engine oil to be used and the oil 
capacity can be found in the engine 
instruction manual.

Oil drain plug:

Loosen screws (1), but do not unscrew 
fully (remain on belt guard) and remove 
belt guard (2).

Remove oil drain plug (3) and drain 
engine oil.

Reinsert oil drain plug (3) and fill with 
fresh engine oil. Install belt guard (2).

11

.6 Storage and winter break

Store the garden shredder in a dry and 
locked place that is generally free of dust. 
Make sure that the machine is kept out of 
the reach of children.

Only store the garden shredder in good 
operating condition and with the feed 
chute fitted.

Note the following points when storing the 
garden shredder for extended periods 
(over winter):

Thoroughly clean all external parts of 
the machine.

Thoroughly lubricate/grease all moving 
parts.

Empty fuel tank and carburettor (e.g. by 
running the engine).

Unscrew spark plug and pour 
approx. 3 cm³ of engine oil into the 
engine via the spark plug hole. Turn the 
engine several times with the spark 
plug removed.

Re-install the spark plug.

Perform oil change (

Ö

engine 

instruction manual).

Cover the engine well and store the 
machine in a dry, dust-free room in the 
upright position.

1

2.

1

 Pulling or pushing the 

garden shredder

Hold the garden shredder at the 
upper chute (1) and tilt to the rear.

The garden shredder can be pulled or 
pushed slowly (walking pace).

1

2.2 Lifting or carrying the 

garden shredder

When lifting the garden shredder, hold it 
at the housing on the right and under 
the engine on the left.

1

2.3 Transporting the garden 

shredder on a load floor

Always place the garden 
shredder in the upright position when 
transporting it on a load floor.

Secure the machine against slipping 
using suitable fastening materials. 
Attach ropes or straps to the wheel 
carrier (1) and the feed chute (2).

Important information on maintenance 
and care of the product group

petrol garden shredder (STIHL GH)

STIHL assumes no liability for material or 
personal damage caused by the non-
observance of information contained in the 
operating instructions, in particular with 
regard to safety, operation and 
maintenance, or which arise through the 
use of unauthorised attachment or spare 
parts.

20

Fire hazard!

Keep the spark plug socket away 
from the spark plug hole (danger of 
ignition).

1

2. Transport

Risk of injury!

Before transporting, carefully read 
and observe the section "For your 
safety", in particular the 
"Transporting the machine" section. 
(

Ö

4.4)

2

1

Due to its heavy weight, at least two 
persons are required to lift the 
garden shredder. Always wear 
suitable protective clothing; the 
lower arms and upper part of the 
body must be fully covered.

1

3. Minimising wear and 

preventing damage

22

23

Summary of Contents for GH 370 S

























Reviews: