FSA 90 R
English
21
Function of set wheel
The set wheel (4) enables the travel of
the trigger switch to be preset for any
motor speed:
–
Turn the set wheel (4) in direction of
– for shorter trigger switch travel and
a reduced motor speed.
–
Turn the set wheel (4) in direction of
+ for longer trigger switch travel and
a higher motor speed.
–
You can override the preset stop by
pulling the trigger switch firmly to
accelerate the motor up to
maximum speed – the preset stop
remains unaffected. The original
setting is restored when the trigger
switch is released.
Fitting the Battery
A factory-new battery is not fully
charged.
Recommendation: Fully charge the
battery before using it for the first time.
N
If necessary, remove the cover from
the battery compartment before
fitting the battery, i.e. depress both
locking tabs to unlock and remove
the cover.
N
Insert the battery (1) in the power
tool – the battery slides into the
compartment – press it down
carefully until it snaps into position –
the battery must be flush with the
top of the housing.
Switching On
N
Make sure you have a secure and
firm footing.
N
Stand upright – hold the power tool
in a relaxed position.
N
Make sure the cutting attachment is
not touching the ground or any other
objects.
N
Hold your trimmer with both hands –
right hand on the control handle.
N
Unlock the power tool by moving the
retaining latch (2) to
‚
.
N
Push down the trigger switch
lockout (3) and depress the trigger
switch (4) and hold them in that
position.
The motor runs only if the retaining
latch (2) is on
‚
and the trigger switch
lockout (3) and trigger switch (4) are
operated simultaneously.
4
3988BA021 KN
1
3905BA01
1 KN
3988BA022 KN
2
3988BA023 KN
3
4
2
