FSA 90 R
English
19
The type and style of the
harness/shoulder strap depend on the
market.
The use of the shoulder strap/harness is
described in the chapter on "Approved
Combinations of Cutting Attachment,
Deflector, Handle and Harness".
Use Type AR batteries only with the
harness provided – do not combine with
other carrying straps (e.g. shoulder
strap, full harness, etc.).
Shoulder Strap
N
Put on the shoulder strap (1).
N
Adjust the length of the strap so that
the carabiner (2) is about a hand’s
width below your right hip.
N
Balance the machine – see
"Balancing the Machine".
The type and style of the harness and
carabiner (spring hook) depend on the
market.
Attaching Machine to Harness
N
Attach the carabiner (1) to the
carrying ring (2) on the shaft.
Floating Position
N
The cutting attachment should just
touch the ground.
The correct floating position is obtained
as follows:
Fitting the Harness
1
3988BA017 KN
2
Balancing the Machine
1
2
1
2
002BA387 KN
3988BA019 KN
