![background image](http://html1.mh-extra.com/html/stihl/fsa-56/fsa-56_instruction-manual_1379688021.webp)
0458-713-8221-A
19
English
11 LED Diagnostics
To charge the battery:
► Push the battery (2) into the charger (3) until it stops.
The LED on the charger (4) glows green when the battery
is being charged.
The LEDs (1) on the battery glow green and show the
state of charge.
The charging process is complete when the LED on the
charger and the LEDs on the battery go out.
The charger turns itself off when the battery is fully
charged.
► Remove the battery from the charger and disconnect the
power supply cord from the wall outlet when charging is
complete.
A battery is not fully charged when it ships from the factory.
STIHL recommends that you fully charge the battery before
using it the first time.
Operate the charger only indoors, in dry rooms and within an
ambient temperature range of 41 °F to 104 °F (5 °C to
40 °C).
The battery heats up during operation of the trimmer. If a hot
battery is inserted into the charger, it may be necessary for
it to cool down before charging starts. The charging process
begins only after the battery has cooled down sufficiently.
Charging time depends on a number of factors, including
battery condition and ambient temperature. For a complete
list of approximate charging times, see www.stihl.com/
charging-times.
11.1 LEDs on the Battery
11.1.1 Battery Status
Four LEDs show the status of the battery. These LEDs can
glow or flash green or red.
11.1.2 Trimmer Status
When the battery is inserted in the trimmer, the same LEDs
on the battery will indicate the status of the trimmer.
If three LEDs glow red continuously: the trimmer motor is too
hot. Allow the motor to cool down.
If three LEDs flash red when you activate the trigger switch:
the trimmer has an electrical malfunction. Do not operate the
trimmer. Have it checked by an authorized STIHL servicing
dealer before use or storage.
For troubleshooting information,
23.1.
11.1.3 Charge Status
The LEDs on the battery also show the battery's state of
charge.
3
2
4
1
0000-GXX-0637-A0
11 LED Diagnostics
If one LED glows red continuously: the battery
is either too hot or too cold. Allow the battery
to warm up or cool down gradually at an
ambient temperature of about 50 °F to 68 °F
(10 °C to 20 °C).
If all 4 LEDs flash red: the battery has a
malfunction and must be replaced. Do not
attempt to charge, use or store the battery.