FS 510 C, FS 560 C
English
24
N
Fit or remove the cutting attachment
– see chapter on "Mounting the
Cutting Attachment".
N
Remove the stop pin.
NOTICE
Always remove the stop pin used to
block the shaft since the drive train will
otherwise be damaged when the engine
runs.
Mounting the cutting attachment
WARNING
Use a deflector that matches the cutting
attachment – see "Mounting the
Deflector".
Fitting Mowing Head with Screw
Mounting
Keep the instruction leaflet for the
mowing head in a safe place.
All approved mowing heads are
mounted to the gearbox in the same
way.
N
Check that the deflector on the
machine is approved for mowing
heads – if not, perform the next two
steps.
N
Remove grass shield with thrust
plate – if fitted.
N
Remove the non-approved
deflector.
N
Mount deflector for mowing heads.
N
Fit grass shield together with 60 mm
(2.4 in) diameter thrust plate.
N
Screw the mowing head
counterclockwise on to the shaft (1)
as far as stop.
N
Block the shaft.
N
Tighten down the mowing head
firmly.
NOTICE
Remove the tool used to block the shaft.
Remove the mowing head.
N
Block the shaft.
N
Unscrew the mowing head
clockwise.
Removing and Installing Metal Cutting
Attachments
Before removing and installing metal
cutting attachments:
WARNING
Wear protective gloves to reduce the
risk of direct contact with the sharp
cutting edges.
Mounting Grass Cutting Blades
N
Check that the deflector on the
machine is approved for grass
cutting blades – if not, perform the
next two steps.
N
Remove grass shield with thrust
plate – if fitted.
N
Remove the non-approved
deflector.
N
Mount deflector for grass cutting
blades and brush knives.
N
Fit grass shield together with 60 mm
(2.4 in) diameter thrust plate.
Check direction of rotation of cutting
attachment
The cutting edges of the grass cutting
blades 255
-
8 (1) and 250
-
40 Spezial (2)
must point clockwise.
1
002BA468 KN
1
2
681BA186 KN
