FS 510 C, FS 560 C
English
39
N
Use resistor type spark plugs with a
properly tightened adapter nut.
Installing the Spark Plug
N
Screw the spark plug into the
cylinder.
N
Press the spark plug boot firmly
onto the spark plug.
N
Fit the cap (1) on the shroud from
the rear and push the lug (2) into the
opening (3) in the shroud at the
same time.
N
Swing the cap forwards onto the
shroud, insert and tighten down the
screw (4) firmly.
If engine running behavior is still
unsatisfactory after servicing the air filter
and adjusting the throttle cable, the
cause may be the muffler.
Have the muffler checked by a servicing
dealer for contamination
(carbonization).
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
If the machine is to remain out of use for
approx. 3 months or more
N
Drain and clean the fuel tank in a
well ventilated place
N
Dispose of fuel in accordance with
the regulations and having regard
for the environment
N
Run the engine until the carburetor
is dry. This helps to prevent the
carburetor diaphragms sticking
together.
N
Remove, clean and inspect the
cutting attachment. Treat metal
cutting attachments with protective
oil.
N
Thoroughly clean the machine
N
Store the machine in a dry and safe
place, out of the reach of children
and other unauthorized users
2
3
4900BA024 KN
Engine Running Behavior
Storing the Machine
