![background image](http://html1.mh-extra.com/html/stihl/fs-410-c-k/fs-410-c-k_instruction-manual_1379677039.webp)
FS 410 C K
English
37
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
Engine
Single cylinder two-stroke engine
Ignition system
Electronic magneto ignition
This ignition system fulfills all
requirements of the Canadian
Interference-Causing Equipment
Regulations ICES
-
002.
Fuel system
All position diaphragm carburetor with
integral fuel pump
Weight
Overall length
Cutting Attachments
Metal cutting attachments
1
Scratcher tooth circular saw blade
200
2
Chisel tooth circular saw blade 200
3
Scratcher tooth circular saw blade
225
4
Chisel tooth circular saw blade 225
5
Carbide tipped circular saw blade
225
Use cutting attachments only as
specified in the chapter on "Approved
Combinations of Cutting Attachment,
Deflector, Limit Stop and Harness".
Special accessories for cutting
attachments
–
Transport guard for items 1 to 5
Sharpening aids for metal cutting
attachments
–
Flat sharpening files for items 1, 3
–
File holder with round file for items
2, 4
–
Saw set for items 2, 4
–
STIHL balancer for items 1 to 5
Mounting hardware for metal cutting
attachments
–
Thrust washer
–
Rider plate for sawing applications
Specifications
A = 300 hours
B = 125 hours
C = 50 hours
Displacement:
41,6 cm
3
Bore:
42 mm
Stroke:
30 mm
Engine power to
ISO 8893:
2.0 kW (2.7 HP)
at 9000 rpm
Idle speed:
2800 rpm
Cut-off speed (nomi
-
nal value):
12500 rpm
Max. output shaft
speed (cutting
attachment):
10290 rpm
Spark plug
(suppressed):
NGK CMR6H
Electrode gap:
0.5 mm
Fuel tank capacity:
0.75 l
dry, without cutting
attachment and deflector: 8.4 kg
Without cutting
attachment:
1675 mm
Special Accessories