background image

It is important that you read and

understand the User Manual before

commissioning and keep it in a safe

place for future reference. Non-com‐

pliance with the User Manual may

cause serious or even fatal injury.

Observe all applicable local safety regulations,

e.g. by trade organizations, social insurance

institutions, labor safety authorities etc.
If you have never used a power tool before:

Have your dealer or other experienced user

show you how to operate your machine – or

attend a special course to learn how to operate

it.
Minors should never be allowed to use the

machine – except for apprentices over the age of

16 when working under supervision.
Children, animals and onlookers must remain at

a safe distance.
When not using the machine, it must be laid

down in such a way that it does not endanger

anyone. Ensure that the machine cannot be

used without authorization.
The user is responsible for accidents or risks

involving third parties or their property.
Do not lend or rent your power tool without the

User Manual. Be sure that anyone using it under‐

stands the information contained in this manual.
The use of machines that emit noise may be limi‐

ted to certain hours of the day as specified by

national and/or regional or local regulations.
Anyone operating the machine must be well res‐

ted, in good physical health and in good mental

condition.
If you have any condition that might be aggrava‐

ted by strenuous work, check with your doctor

before operating a machine.
If you have a pacemaker: The ignition system of

your machine produces an electromagnetic field

of very low intensity. This field may interfere with

some pacemakers. STIHL recommends that per‐

sons with pacemakers consult their physician

and the pacemaker manufacturer to reduce any

health risk.
Anyone who has consumed alcohol or drugs or

medicines affecting their ability to react must not

operate a power tool.
Depending on the cutting attachment fitted, use

your power tool only for cutting grass, wild

growth, shrubs, scrub, bushes, small diameter

trees and similar materials.

The machine must not be used for any other pur‐

poses – risk of accidents!
Only use cutting attachments and accessories

that are explicitly approved for this power tool

model by STIHL or are technically identical. If

you have any questions in this respect, consult

your dealer. Use only high-quality parts and

accessories. in order to avoid the risk of acci‐

dents and damage to the machine.
STIHL recommends the use of genuine STIHL

tools and accessories. They are specifically

designed to match the product and meet your

performance requirements.
Never attempt to modify your power tool in any

way since this may increase the risk of personal

injury. STIHL excludes all liability for personal

injury and damage to property caused while

using unauthorized attachments.
Do not use a high-pressure washer to clean the

power tool. The solid jet of water may damage

parts of the unit.
The guard provided with your machine may not

protect the operator from all foreign objects

(gravel, glass, wire etc.) ejected by the revolving

cutting attachment. Ejected objects may also ric‐

ochet and strike the operator.

2.1

Clothing and equipment

Wear proper protective clothing and equipment.

Clothing must be sturdy but allow

complete freedom of movement.

Wear close-fitting clothes such as a

boiler suit, not a loose jacket.
Do not wear clothing which could

become trapped in wood, brush or

moving parts of the machine. Do not

wear a scarf, necktie or jewelry. Tie

up and confine long hair above your

shoulders.
Wear safety boots with steel toe caps

and non-slip soles.

Sturdy shoes with non-slip shoes are permissible

only when using mowing heads.

WARNING

To reduce the risk of eye injuries,

wear close-fitting safety glasses in

accordance with European Standard

EN 166. Make sure the safety

glasses are a snug fit.

2 Safety Precautions and Working Techniques

English

0458-433-0121-B

3

Summary of Contents for FS 311









































Reviews: