Stihl FS 311, Instruction Manual, Page: 14 / 40

A
4
1
0000-GXX-0524-A0
► Place the handlebar (4) in the lower clamp
molding (1) so that distance A is no more than
15 cm (6 in).
► Place the upper clamp molding (2) in position
and press it down.
► Insert the clamp screw (3).
► Line up the handlebar (4) at a right angle to
the drive tube.
► Tighten down the clamp screw (3) firmly.
9
5
7
8
4
9
0000-GXX-0525-A0
6
7
► Take out the screw (5), the nut (6) remains in
the control handle (7).
► Push the control handle onto the handlebar (4)
until the holes (9) line up – the throttle trig‐
ger (8) must point towards the gearbox.
► Insert the screw and tighten it down firmly.
► Go to "Adjusting the Throttle Cable".
Swinging handlebar into transport position
7
3
0000-GXX-0513-A0
English 4 Mounting the Bike Handle
14 0458-433-0121-B