FS 310
English
23
Block the shaft.
N
Insert the stop pin (1) in the bore (2)
in the gearbox as far as stop, apply
slight pressure.
N
Rotate the shaft until the stop pin
slips into position.
Mount the cutting attachment.
WARNING
Use a deflector that matches the cutting
attachment – see "Mounting the
Deflector".
Fitting Mowing Head with Screw
Mounting
Keep the instruction leaflet for the
mowing head in a safe place.
N
Screw the mowing head
counterclockwise on to the shaft (1)
as far as stop.
N
Block the shaft.
N
Tighten down the mowing head
firmly.
NOTICE
Remove the tool used to block the shaft.
Removing the Mowing Head
N
Block the shaft.
N
Unscrew the mowing head
clockwise.
Removing and Installing Metal Cutting
Attachments
Before removing and installing metal
cutting attachments:
WARNING
Wear protective gloves to reduce the
risk of direct contact with the sharp
cutting edges.
Grass Cutting Blades, Brush Knives
Aligning the cutting attachment
Cutting attachments with 3 or
4 blades (1, 2) may point in either
direction – these cutting attachments
must be turned over regularly to help
avoid one-sided wear.
Cutting edges of grass cutting blade (3)
must point clockwise.
Mounting the cutting attachment
N
Fit the guard ring for mowing
applications.
1
2
002BA294 KN
1
002BA385 KN
681BA134 KN
1
2
3
Summary of Contents for FS 310
Page 2: ...Instruction Manual 1 48 Manual de instrucciones 49 102 ...
Page 105: ...FS 310 español EE UU 103 ...
Page 106: ...FS 310 español EE UU 104 ...
Page 107: ......