![background image](http://html.mh-extra.com/html/stihl/fs-310/fs-310_instruction-manual_1379258031.webp)
FS 310
English
29
Controls
1
Throttle trigger lockout
2
Throttle trigger
3
Slide control
Positions of slide control
4
STOP
-
0 – engine off – the ignition is
switched off
5
F
– normal run position – the engine
is running or can start
6
START – ignition is switched on –
the engine can start
Symbol on slide control
7
h
– stop symbol and arrow. To stop
the engine, push the slide control in
the direction of the arrow on the stop
symbol (
h
) to STOP
-
0.
Starting
N
Press down the trigger lockout lever
and squeeze the throttle trigger
N
and hold them in that position.
N
Move the slide control to START
and hold it there.
N
Now release the throttle trigger,
slide control and trigger interlock in
that order. This is the starting
throttle position.
N
Set the choke knob (8):
N
Press the manual fuel pump
bulb (9) at least five times – even if
the bulb is already filled with fuel.
N
Put the unit on the ground: It must
rest on the engine support and
deflector. Check that the cutting
attachment is not touching the
ground or any other obstacles.
N
Make sure you have a firm footing.
N
Hold the unit with your left hand and
press it down firmly – your thumb
should be under the fan housing.
NOTICE
Do not stand or kneel on the drive tube
since it will otherwise be permanently
bent and damaged.
Starting / Stopping the
Engine
3
STOP
5
6
4
7
002BA182 KN
1
2
START
STOP-
g
if the engine is cold
e
for warm start – also use this posi
-
tion if the engine has been running
but is still cold.
249BA057 KN
9
8
273BA001 KN
273BA002 KN
Summary of Contents for FS 310
Page 2: ...Instruction Manual 1 48 Manual de instrucciones 49 102 ...
Page 105: ...FS 310 español EE UU 103 ...
Page 106: ...FS 310 español EE UU 104 ...
Page 107: ......