Stihl FS 260, Instruction Manual

Page: 21 / 112

FS 260 C, FS 360 C
English
19
N
Remove dirt from joints on gearbox
and defelector – make sure that no
dirt gets into the screw holes in the
gearbox.
N
Place the deflector on the
gearbox (6).
N
Insert the screws (7) and tighten
them down firmly.
Placing power tool on the ground
N
Shut off the engine.
N
Lay your power tool on its back so
that the cutting attachment
mounting face is pointing up.
Use the Right Guard Ring
Your power tool comes standard with a
guard ring.
The guard ring is also available as a
special accessory.
The guard ring must be mounted with
particular care. Have this work
performed by your servicing dealer.
STIHL recommends a STIHL servicing
dealer.
Guard ring for mowing applications
Always fit guard ring (1) when using
–
mowing heads
–
grass cutting blades
–
brush knives
–
shredder blades
to ensure optimum protection against
grass cuttings.
Guard ring for sawing applications
Fit guard ring (2) only when you use
circular saw blades.
7
6
002BA405 KN
Mounting the Cutting
Attachment
002BA406 KN
002BA490 KN
2
1
3
5
002BA491 KN
4
2