![background image](http://html.mh-extra.com/html/stihl/fs-260-c/fs-260-c_instruction-manual_1379256031.webp)
FS 260 C, FS 360 C
English
29
Attaching machine to harness
N
Attach the carabiner (1) to the
carrying ring (2) on the shaft.
N
Balance the machine – see
"Balancing the Machine".
Disconnecting machine from harness
N
Press down the bar on the
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
FS 360
Putting on the harness
N
Put on the full harness (1).
N
Adjust the length of the strap so that
the carabiner (2) is about a hand’s
width below your right hip.
N
Attach the spring hook to the
machine's perforated rail (3).
N
Find the right attachment point for
the cutting attachment you are
using – see "Balancing the
Machine".
Attaching machine to harness
N
Attach the carabiner (1) to the
perforated rail (2) on the drive tube.
Disconnecting machine from harness
N
Press down the bar on the
carabiner (1) and pull the perforated
rail (2) out of the carabiner.
Throwing Off the Machine
WARNING
The machine must be quickly thrown off
in the event of imminent danger. To
throw off the machine, use the
procedure described under "Detaching
Machine from Harness". Practice
removing and putting down the machine
as you would in an emergency. To avoid
damage, do not throw the power tool to
the ground when practicing.
1
2
1
2
002BA604 KN
2
1
1
2
002BA606 KN
3
002BA41
1 KN
1
2
2
1
002BA631 KN
1
2
2
1
002BA632 KN
1
2