![background image](http://html.mh-extra.com/html/stihl/fs-260-c/fs-260-c_instruction-manual_1379256028.webp)
FS 260 C, FS 360 C
English
26
N
Remove the guard washer (1) and
thrust plate (2).
N
Remove the guard ring (3) for
mowing attachments.
N
Keep the guard washer and guard
ring in a safe place for future use.
N
Fit the guard ring (4) for saw blades.
N
Slip the thrust plate (2) over the
shaft.
N
Fit the limit stop (5) for circular saw
blades.
NOTICE
Do not use the guard washer (1) with
circular saw blades.
Check direction of rotation of cutting
attachment
Cutting edges of circular saw blades
must point clockwise.
N
Place the cutting attachment (1) in
position.
WARNING
Collar (a) must locate in the cutting
attachment's mounting hole (b).
Securing the cutting attachment
N
Fit the thrust washer (2) – convex
side must face up.
N
Fit the rider plate (3).
A rider plate (3) for sawing applications
is available as a special accessory. It
allows the full depth of cut of the saw
blade to be used.
N
Block the shaft.
N
Fit the nut (4) counterclockwise and
tighten it down firmly.
WARNING
If the mounting nut has become too
loose, fit a new one.
NOTICE
Remove the tool used to block the shaft.
Removing the cutting attachment
N
Block the shaft.
N
Unscrew the mounting nut
clockwise.
N
Pull the cutting attachment with its
mounting hardware off the gearbox.
002BA490 KN
2
1
3
5
002BA491 KN
4
2
681BA165 KN
2
3
1
4
002BA423 KN
b
a