![background image](http://html.mh-extra.com/html/stihl/fs-260-c/fs-260-c_instruction-manual_1379256022.webp)
FS 260 C, FS 360 C
English
20
N
Raise the grip of the wing screw (7)
to the upright position.
N
Turn the wing screw
counterclockwise as far as stop.
N
Push the wing screw into the handle
support as far as stop and then
screw it down – but do not finally
tighten yet.
N
Adjust the handlebar (2) so that
distance A is no more than 15 cm.
N
Line up the handlebar at a right
angle to the drive tube.
N
Turn the wing screw clockwise as
far as stop.
N
Fold the grip of the wing screw down
so that it is flush.
FS 260: Fitting the Throttle Cable
NOTICE
Do not kink the throttle cable or lay it in
tight radii – make sure the throttle trigger
moves freely.
N
Attach the throttle cable (12) to the
retainer (13).
Adjusting the Handlebar
Opening the wing screw
N
Raise the grip of the wing screw to
the upright position.
N
Turn the wing screw
counterclockwise until the handle
support can be moved.
N
Move the handlebar to the required
position.
6BA003 KN
2
7
6BA005 KN
6BA006 KN
12
13
002BA439 KN
13
12
6BA023 KN
6BA004 KN
6BA007 KN