FS 131, FS 131 R
English
25
Attaching Machine to Harness
The type and style of the shoulder strap
and carabiner depend on the market.
N
Attach the carabiner (1) to the
carrying ring (2) on the drive tube.
Balancing the Machine
The unit is balanced differently
depending on the cutting attachment
used.
Proceed as follows until the conditions
specified under "Floating positions"
have been met:
N
Loosen the screw (1).
N
Slide the carrying ring (2) along the
drive tube.
N
Tighten the screw (1) moderately.
N
Allow the unit to hang freely.
N
Check the position obtained:
Balanced positions
Mowing tools (A) such as mowing
heads, grass cutting blades and brush
knives
N
should just touch the ground.
Circular saw blades (B)
N
should "hover" about 20 cm (8 in)
above the ground.
When the correct balanced position has
been reached:
N
Tighten down the screw (1) on the
carrying ring firmly.
Disconnecting Machine from Harness
N
Press down the bar on the
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
Balancing the Machine
1
002BA660 KN
2
1
1
2
2
002BA662 KN
1
2
A
002BA034 KN
B
002BA035 KN
002BA661 KN
2
1
1
1
2
2
