FS 111 RX
English
16
N
Mount the loop handle (1)
about 8 in/20 cm (A) forward of the
control handle (2).
N
Line up the loop handle.
N
Tighten down the screws firmly.
The sleeve (3) must be between the
loop handle and the control handle.
It may be necessary to correct the
adjustment of the throttle cable after
assembling the machine or after a
prolonged period of operation.
Adjust the throttle cable only when the
unit is completely and properly
assembled.
N
Set the throttle trigger to the full
throttle position.
N
Carefully rotate the screw in the
throttle trigger in the direction of the
arrow until you feel initial resistance.
Then rotate it another half turn in the
same direction.
Polymer Version
For position of carrying ring see "Main
Parts".
N
Push the carrying ring (1) over the
drive tube.
N
Insert the M5 nut in the hex recess
in the carrying ring.
N
Fit the M5x14 screw.
N
Line up the carrying ring.
N
Tighten down the screw firmly.
Mounting the Loop Handle
0000-GXX-0518-A0
A
1
2
3
Adjusting the Throttle Cable
002BA655 KN
Fitting the Carrying Ring
1
002BA529 KN
