background image

► Start the engine as described in this instruc‐

tion manual.

■ The rotating cutting attachment can cut the

user. This may result in serious injury to the

user.

► Do not touch the rotating cutting attach‐

ment.

► If the cutting attachment is blocked by an

object: Shut off the engine. Before clearing

the jam.

■ If you work with mowing lines that are too

long, the brush cutter may be damaged.

► Use a suitable deflector with attached line

limiting blade.

■ The machine can be damaged if you open the

throttle while the cutting attachment is blocked

by an object.

► Shut off the engine. before clearing the jam.

■ If the behavior of the trimmer changes during

operation or feels unusual, it may no longer be

in a safe condition. This may result in serious

injury to people and damage to property.

► Stop work and consult a STIHL servicing

dealer.

■ Trimmer vibrations may occur during opera‐

tion.

► Wear gloves.

► Take breaks.

► If signs of a circulatory disturbance occur:

Consult a doctor.

■ If the cutting attachment makes contact with a

foreign object during operation, the object or

parts of it may be thrown at high speed. Per‐

sons may be injured or property damaged.

► Remove foreign objects from the working

area.

■ If the rotating metal cutting attachment makes

contact with a hard object, sparks may occur

and the cutting attachment may be damaged.

Sparks can cause fires in a flammable envi‐

ronment. Persons may be seriously or fatally

injured and property may be damaged.

► Do not use the chain saw in a flammable

environment.

► Make sure the metal cutting attachment is

in a safe condition.

■ Note that the cutting attachment continues to

rotate for a short period after you release the

trigger. They may cause serious injury to per‐

sons.

► Wait until the cutting attachment comes to a

complete stop.

■ In an emergency, the user may start to panic

and forget to take off the carrying system. This

may result in serious injury to the user.

► Practice taking off the carrying system.

4.9

Reactive forces

0000-GXX-3025-A1

Kickout can be caused for the following reasons:

The shaded area or the black area of the rotat‐

ing metal cutting attachment comes into con‐

tact with a solid object and is suddenly braked.

The rotating metal cutting attachment gets

pinched in the cut.

The risk of kickout is greatest in the black area.

WARNING

■ These situations can abruptly decelerate or

stop rotation of the cutting attachment and

cause the cutting attachment to be thrown to

the right or in the direction of the user (black

arrow). The user can lose control of the trim‐

mer. This may result in serous or fatal injury to

people.

► Hold the trimmer firmly with both hands.

► Work as described in this user manual.

► Do not use the black area for cutting.

► Use a combination of cutting attachment

and deflector recommended in this instruc‐

tion manual.

► Sharpen the metal cutting attachment cor‐

rectly.

► Work with the engine running at full throttle.

4.10

Transporting

WARNING

■ The gearbox can get hot during operation.

There is a risk of burn injuries.

► Do not touch a hot gearbox.

■ The trimmer may turn over or shift during

transport. This may result in personal injuries

and damage to property.

► Shut off the engine.

► If a metal cutting attachment is mounted: Fit

the transport guard.

► Secure the trimmer with lashing straps or a

net to prevent it turning over and moving.

4 Safety Precautions

English

0458-527-0121-B

9

Summary of Contents for FR 235

























Reviews: