background image

FH-KM

English

15

Cutting blades

Weight

Noise and Vibration Data

Noise and vibration data measurements 

on power tools with the FH-KM 

KombiTool include idling and rated 

maximum speed with the same duration 

of exposure.
For further details on compliance with 

Vibration Directive 2002/44/EC see 

www.stihl.com/vib.

Sound pressure level L

p

 to ISO 22868

Sound power level L

w

 to ISO 22868

Vibration measurement a

hv,eq

 to 

ISO 22867 

The K

-

factor in accordance with 

Directive 2006/42/EC is 2.5 dB(A) for 

the sound pressure level and sound 

power level; the K

-

factor in accordance 

with Directive 2006/42/EC is 2.0 m/s

2

 

for the vibration measurement.

REACH

REACH is an EC regulation and stands 

for the Registration, Evaluation, 

Authorisation and Restriction of 

Chemical substances.
For information on compliance with the 

REACH regulation (EC) No. 1907/2006 

see www.stihl.com/reach.

Users of this machine may only carry out 

the maintenance and service work 

described in this user manual. All other 

repairs must be carried out by a 

servicing dealer.
STIHL recommends that you have 

servicing and repair work carried out 

exclusively by an authorized STIHL 

servicing dealer. STIHL dealers are 

regularly given the opportunity to attend 

training courses and are supplied with 

the necessary technical information.
When repairing the machine, only use 

replacement parts which have been 

approved by STIHL for this power tool or 

are technically identical. Only use high-

quality replacement parts in order to 

avoid the risk of accidents and damage 

to the machine.
STIHL recommends the use of original 

STIHL replacement parts.
Original STIHL parts can be identified by 

the STIHL part number, the 

{

 

logo and the STIHL parts symbol 

K

 

(the symbol may appear alone on small 

parts).

Specifications

Type:

Double-edged 

for bidirectional 

cutting

Cutting length:

250 mm

Tooth spacing:

34 mm

Tooth height:

22 mm

Sharpening angle:

45° to 

horizontal

FH-KM:

2.1 kg

KM 56 R:

92 dB(A)

KM 85 R:

96 dB(A)

KM 94 R:

88 dB(A)

KM 111 R:

96 dB(A)

KM 131:

97 dB(A)

KM 131 R:

97 dB(A)

FR 131 T:

97 dB(A)

KM 56 R:

105 dB(A)

KM 85 R:

110 dB(A)

KM 94 R:

105 dB(A)

KM 111 R:

108 dB(A)

KM 131:

110 dB(A)

KM 131 R:

110 dB(A)

FR 131 T:

110 dB(A)

Handle, 

left

Handle, 

right

KM 56 R:

5.6 m/s

2

5.8 m/s

2

KM 85 R:

3.5 m/s

2

4.2 m/s

2

KM 94 R:

3.1 m/s

2

3.9 m/s

2

KM 111 R:

4.4 m/s

2

2.7 m/s

2

KM 131:

2.3 m/s

2

2.9 m/s

2

KM 131 R:

4.7 m/s

2

3.3 m/s

2

FR 131 T:

1.8 m/s

2

1.7 m/s

2

Maintenance and Repairs

Summary of Contents for FH-KM





















Reviews: