GTC POWERED CASE TRIMMER Instruction Manual Download | Manualshive

Page: 1 / 10

background image

Giraud Tool Company, Inc.

Giraud Powered Case Trimmer

U.S. Patent #6,484,616

Description and Instructions for Giraud Powered Case Trimmer

The Giraud Powered Case Trimmer is designed for the quality conscious shooter or reloader
needing a dependable medium volume case trimmer for bottleneck rifle cartridge cases. This
trimmer will provide the user with the best equipment available for uniform trimming and
chamfering of rifle cartridges outside of a military type arsenal.

The trimmer comes complete and ready to use, set up in one caliber. Presently, there are over
175 different available sizes. A list is shown on the last page of this Instruction manual.
Additionally, if you have a chamber reamer for other wildcat sizes, they can be accommodated by
finishing a blank case holder with that reamer.

Giraud Tool Company, Inc.
3803 Dawn Lane
Richmond, TX 77406-7601

281-238-0844, Orders M-F, 9am to 5pm CST
281-232-0987, Fax, 24/7
713-907-2695, Info/Questions only, after 6pm CST

1
2
3
...
»

Summary of Contents for POWERED CASE TRIMMER











Reviews:

No comments

Related manuals for POWERED CASE TRIMMER

Brand: Tanaka Pages: 17

Brand: Ryobi Pages: 18

Brand: MADER GARDEN Pages: 26

BASIC PE-AHS 18 Li

Brand: Pattfield Ergo Tools Pages: 250

Brand: Tanaka Pages: 56

Brand: Ryobi Pages: 34

Brand: Yard-Man Pages: 104

Brand: Pattfield Ergo Tools Pages: 86

Brand: Ego Power+ Pages: 228

Brand: Electrolux Pages: 12

Brand: Electrolux Pages: 8

Brand: Electrolux Pages: 12

Brand: Electrolux Pages: 17

Brand: Electrolux Pages: 20

Brand: Parkside Pages: 40

Brand: Power works Pages: 31

Brand: Cramer Pages: 124

Brand: PRETUL Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands