![background image](http://html1.mh-extra.com/html/stihl/fc-75/fc-75_user-manual_1378585033.webp)
Throttle cable with one short-
circuit wire
- Remove throttle trigger,
•
Lift contact spring (1) up slightly
and remove throttle cable (2).
•
Unhook contact spring from pivot
pin (1) and stud bolt (2).
•
Unscrew stud bolt (1) on slide
control.
•
Remove detent spring (2).
•
Pull slide control out of handle
moulding.
The parts are assembled in rever-
se order.
- The contact spring must be inser-
ted correctly in the outer groove
around the stud bolt.
Throttle cable with two short-
circuit wires
- Refer to the manual "Trouble-
shooting, standard repairs" with
regard to changing the throttle
trigger, interlock lever, contact
spring and detent spring.
Contact spring/detent spring in control handle
Throttle trigger /
interlock lever
33