![background image](http://html1.mh-extra.com/html/stihl/fc-75/fc-75_user-manual_1378585030.webp)
The starter grip is supplied with
starter rope.
- Remove starter cover,
- Remove rope rotor, see manual
"Troubleshooting, standard
repairs".
- Pull knot out of compartment in
rope rotor.
•
Undo knot and pull starter rope
out of rope rotor and starter
cover.
•
Thread new starter rope through
rope guide bush from the outside.
•
Thread starter rope into hole in
side of rope rotor.
- Secure starter rope with a simple
knot.
•
Pull starter rope back until knot
lies in compartment in rope rotor.
•
Press end of rope into locating
slot.
- Install rope rotor, see manual
"Troubleshooting, standard
repairs".
- Tension rewind spring,
- Install starter cover,
- Block piston with the aid of the
locking strip,
- Remove starter cover,
•
Unscrew starter carrier from
crankshaft stub.
- Remove pawl, see manual "Trou-
bleshooting, standard repairs".
- Screw on starter carrier and
tighten to a torque of 20 Nm.
- Install starter cover,
- Pull out locking strip.
- Screw in spark plug and tighten
to a torque of 20 Nm.
- Reconnect spark plug terminal.
- Refit shroud.
392RA082
VA
392RA080
VA
392RA081
VA
392RA079
VA
392RA078
VA
30