FC 56 C
English
13
The edger is suitable for sharp-
contoured edging of lawns. It will cut
almost all types of grass, weeds and soft
green plants.
Preparations
If the soil is very dry, spray it with a little
water before you start work: this softens
the soil a little and also reduces the
amount of dust created. – Slightly damp
green plants are easier to cut.
WARNING
Remove all obstacles and objects from
the working area.
N
Plan the best route for edging –
always hold and operate the
machine on the right-hand side of
the body
Adjust the depth of cut
N
Shut off the engine – risk of
accident!
N
Loosen wingnut (1)
counterclockwise
N
Adjust wheel (2): upwards – depth
of cut (A) increases; downwards –
depth of cut (A) decreases
Adjust correctly
The depth of cut is influenced by uneven
ground as well as height and working
position of the operator. For this reason,
N
adjust the wheel (2) so that the
blade (3) barely touches the ground
when the machine is held in a
normal working posture or
penetrates the ground at most to a
depth (B) of 5 mm.
Using the Unit
239BA015 KN
2
1
A
239BA012 KN
2
B
3
239BA013 KN