Stihl BT 131, Service Manual

Page: 7 / 28

BT 131 5
5.5 Fitting the Assist Handle
N
Coat inside of assist handle (9) with press fluid.
N
Push the assist handle (9) onto the handlebar (10)
until distance "a" is 37 mm (1.5 in).
N
Fit handlebar (10) together with assist handle (9),
@
5.7.
5.6 Fitting the Control Handle
N
Degrease clamp surfaces on handlebar (6).
N
Loosen the screws (3).
N
Push control handle (2 ) onto handlebar (6 ) as far as
bend.
N
Tighten down the screws (3).
N
Fit handlebar (6) together with control handle (2),
@
5.7.
5.7 Fitting the Handlebars
N
Push the elbows (1) into place.
N
Insert the screws (4) from outside.
N
Hold the screws (4) steady and fit and tighten down
the nuts (5).
N
Push the handlebars (6 and 10) into place.
N
Insert the screws (8) from outside.
N
Hold the screws (8) steady and fit and tighten down
the nuts (7).
N
Lay throttle cable (13) along the handle frame and
secure it with cable ties (12) – ends facing down.
10
9
a
0000-GXX-2684-A0
12
11 11
0000-GXX-2676-A0