![background image](http://html1.mh-extra.com/html/stihl/br-200/br-200_instruction-manual_1378515007.webp)
0000-GXX-2037-A0
► Tighten down the screw (arrow)
3.2
Mounting the Blower Tube and
Nozzle
2
9928BA021 KN
1
► Connect the blower tube (1) and nozzle (2)
1
9928BA022 KN
3
► Connect the blower tube (1) to tube (3)
3.3
Mounting the Control Handle
1
6
2
9928BA004 AM
► Pull the ends of the clamp on the control han‐
dle (6) apart and push it over connector of
pleated hose (2)
► Attach the throttle cable to the retainer on the
hose clamp (1)
3.4
Adjusting the Control Handle
► Put the machine on your back and adjust the
harness – see "Fitting the Harness".
2
4
6
9928BA005 AM
► Push the blower tube (4) into the connector of
pleated hose (2) as far as it will go
► Move the control handle (6) along the tube to
the most comfortable position
► Tighten down the screw on the control han‐
dle (6)
4
Adjusting the Throttle
Cable
It may be necessary to correct the adjustment of
the throttle cable after assembling the machine
or after a prolonged period of operation.
Adjust the throttle cable only when the unit is
completely and properly assembled.
0009BA008 KN
► Set throttle trigger to the full throttle position –
as far as stop.
► Carefully rotate the screw in the throttle trigger
in the direction of the arrow until you feel initial
resistance. Then rotate it another full turn.
4 Adjusting the Throttle Cable
English
0458-455-0121-D
7