background image

The user is responsible for accidents or risks

involving third parties or their property.
The machine should only be provided or loaned

to people familiar with this model and its opera‐

tion. The instruction manual should always be

handed over with the machine.
The use of noise emitting power tools may be

restricted to certain times by national or local

regulations.
Do not operate your machine if any of its compo‐

nents are damaged.
Do not use a high-pressure washer to clean the

power tool. The solid jet of water may damage

parts of the unit.

2.1

Accessories and replacement

parts

Only use parts and accessories that are explicitly

approved for this power tool by STIHL or are

technically identical. If you have any questions in

this respect, consult your dealer. Use only high

quality parts and accessories. In order to avoid

the risk of accidents and damage to the unit.
STIHL recommends the use of original STIHL

parts and accessories. They are specifically

designed to match the product and meet your

performance requirements.
Never attempt to modify your power tool in any

way since this may increase the risk of personal

injury. STIHL excludes all liability for personal

injury and damage to property caused while

using unauthorized attachments.

2.2

Physical fitness

To operate the power tool you must be rested, in

good physical condition and mental health.
If you have any condition which may be aggrava‐

ted by strenuous work, check with your doctor

before operating a power tool.
If you have a pacemaker: The ignition system of

your machine produces an electromagnetic field

of very low intensity. This field may interfere with

some pacemakers. To reduce health risks,

STIHL recommends that persons with pacemak‐

ers consult their physician and the pacemaker

manufacturer before operating this tool.
Do not operate the power tool if you are under

the influence of any substance (drugs, alcohol)

which might impair vision, dexterity or judgment.

2.3

Intended Use

The blower is designed for blow-sweeping

leaves, grass, paper and similar materials, e.g. in

gardens, sports stadiums, car parks and drive‐

ways. It is also suitable for blow-sweeping forest

paths.
Do not blow-sweep hazardous materials.
Do not use the power tool for any other purpose

because of the increased risk of accidents and

damage to the power tool itself. The product

must not be modified in any way - this may also

lead to accidents or damage to the unit.

2.4

Clothing and equipment

Wear proper protective clothing and equipment.

Clothing must be sturdy but allow

complete freedom of movement.

Wear snug-fitting clothing, an overall

and jacket combination, do not wear

a work coat.
Avoid any clothing, scarves, neckties,

jewelry or anything that could get into

the air intake. Tie up and confine long

hair above your shoulders so that it

cannot be pulled into the machine.

Wear sturdy shoes with non-slip soles.

WARNING

To reduce the risk of eye injuries,

wear close-fitting safety glasses in

accordance with European Standard

EN 166. Make sure the safety

glasses are a snug fit.

Wear "personal" sound protection, e.g. ear

defenders.
STIHL can supply a comprehensive range of per‐

sonal protective equipment.

2.5

Transporting the machine

Always stop the engine.
Transporting in a vehicle:

Secure the machine against overturning, dam‐

age and fuel spillage

2.6

Refueling

Gasoline is extremely flammable –

keep it away from naked flames – do

not spill any fuel – no smoking.

Always shut off the engine before refueling.
Do not fuel a hot engine – fuel may spill and

cause a fire.

2 Safety Precautions and Working Techniques

English

0458-455-0121-D

3

Summary of Contents for BR 200





















Reviews: